16/17
The grip heater temperature can be adjusted in three steps by pushing
the switch. Pushing the switch changes temperature as follows:
OFF
Improperly using the grip heater can be hazardous. Rider can suffer
burns even if the heating temperature is fairly low when the rider is
wearing no gloves and leaves the heater on for long periods. Dam-
aged grip can suffer burns or get an electrical shock.
• Be sure to wear gloves to avoid burns.
• Replace the damaged grips to avoid burns or electrical shock.
NOTE:
•
The grip heater has a built-in automatic switch to avoid unnecessary
battery power consumption. The automatic switch turns off grip
heater when the engine speed becomes lower at engine idling speed.
When the engine speed increases, the automatic switch turns on grip
heater.
•
Pushing the switch will not turn on the grip heater when the engine
speed is low. Increase the engine speed and push the switch again to
turn on the grip heater.
GENUINE SUZUKI ACCESSORIES
MAX
LEVEL3
3 times blink
7 times repeat
Lighting
CAUTION
LEVEL2
2 times blink
7 times repeat
Lighting
MIN
LEVEL1
1 time blink
7 times repeat
Lighting