Receive Mode; Align Remote Control - Grohe DESIGN + ENGINEERING 36 407 Notice D'utilisation

Receive mode

The wash basin and urinal fitting must be switched to
receive mode before data transfer:
- Start water flow for wash basin fittings.
- For urinal fittings, allow an object to be detected for at
least 5 s by the sensor system.
The fitting is ready to receive input for 10 s.
Fittings are ready to receive input for 3 min after the
voltage supply is connected.
WC fittings are always ready to receive input.

Align remote control

Point remote control at the sensor system at a distance of
5–16 cm.
Do not hold remote control within range of the water jet.
83