Automatic Flushing - Grohe DESIGN + ENGINEERING 36 407 Notice D'utilisation

This function is available for products with a manufacturing
date later than 01/07/2007.

Automatic flushing

Automatic flushing serves to ensure water hygiene in the
event of long-term non-utilisation of the fitting.
Activate/deactivate automatic flushing
Factory setting: Activated
Activate function.
ZhE
d/D
Indicator lamp:       
Activate/deactivate automatic flushing.
K&&
hdK
Indicator lamp:
Activated:     Deactivated:      
Switch by pressing again.
Function deactivates after 10 s.
Indicator lamp:    
140