Test Mode - Grohe DESIGN + ENGINEERING 36 407 Notice D'utilisation

h
KE K&&
hdK hdK
ZhE
Z ^ d d ^d
d/D

Test mode

In test mode the detection zone is tested without flowing
water. The water flow is simulated by lighting the indicator
lamp in the sensor system.
Activate function.
d ^d
Indicator lamp:       
Increase detection zone.
Indicator lamp:
Per level:    
Reduce detection zone.
Indicator lamp:
Per level:    
Deactivate function or wait 60 s.
d ^d
Indicator lamp:       
Final setting:      
Wash basin: 20 cm
Wash basin thermostat: 45 cm
Final setting:      
Wash basin: 7 cm
Wash basin thermostat: 20 cm
123