Zodiac Cadet RIB ALU 240 Mode D'emploi page 19

•
To install the deck plug hole cap (part 1) push
it into the lever (part 2) in the transom.
•
TO LOCK IT IN POSITION, TURN THE
HANDLE 90° AS SHOWN BY THE ARROW.
OPEN POSITION, PLUG REMOVED.
CLOSED POSITION, PLUGS IN POSITION.
MAKE SURE THAT THE BAILER IS CORRECTLY LOCKED
1. Deflate the boat
2. Replace the valve protections.
3. Remove oars and equipment.
4. Empty the boat of all water and sand by opening the self-bailers, dry it.
5. Fold in the 2 sides of the main buoyancy tube. Fold the tubes over the hull and fold the cones
onto the transom.
6. Place oars and foot pump inside of boat.
BAILER + PLUG
Boat outside the water (on trailer, cradle, etc.)
Boat in the water
DEFLATING / FOLDING THE BOAT
7 / 7
E
N
G
L
I
S
H