Principle Of Operation - STAMOS Soldering 6105 S-LS-6 Manuel D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

CAUTIONS

General safety information for the use of electrical devices:

To avoid injury from fire or electric shock, please ensure compliance with safety

instructions when using this device. Please read the instruction carefully and make

sure that you have understood it well. Keep the manual near the equipment to be

able to read it at any time. Always use current sources connected to the ground and

providing the necessary voltage (indicated on the label on the device). If you have any

doubt, let an electrician check that your outlet is properly grounded. Never use a da-

maged power cable. Do not open the unit in damp or wet environment, or if you are

wet yourself. Protect the unit of solar radiation. Use the device in a protected locati-

on to avoid damaging the equipment or endangering others. Make sure the device is

able to cool and avoid placing it too close to other devices that produce heat. Before

cleaning, disconnect it. Use a soft damp cloth for cleaning. Avoid using detergent and

make sure that no liquid enters the unit. No internal element of this device needs to

be maintained by the user. An opening of the device without our approval leads to a

loss of warranty.

General safety information for the use of the device:

•

The user manual should be kept close to the device and should always be acces-

sible for the users. Instruct your employees how to use the device properly.

•

Make sure the hot air can circulate well and place the device more than10 cm

away from walls and other electrical devices. Aerate well the working area.

•

Do not place the device close to combustible materials.

•

It may happen that by first use, the heating element produces a light smoke. This

is absolutely normal. Simply check that the smoke can evaporate and that a good

aeration is provided.

•

Some parts of the device can get extremely hot. To avoid any injuries, be careful

by every contact with the device.

•

Clean the device regularly to avoid a durable encrustation of dirt.

TECHCNICAL DETAILS

Modell

Voltage (V)

Rated current (A)

Power (W)

Work temperature (⁰C)

6105 S-LS-6

230 ~ 50Hz

720

0/+40

Storage temperature (⁰C)

Storage humidity

SOLDERING STATION

Temperature range (⁰C)

Output power (W)

Temperature stability

Tip resistance to ground

Tip-to-ground voltage

SMD REWORK STATION

Temperature range (⁰C)

Output power (W)

Temperature stability

Airflow (L/min)

USAGE PURPOSE

The device is designed for:

Different kind of soldering, de-soldering of the electronic components such as:

SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.

Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.

Any damage resulting from a non-conform use of the device is payable by the user!