Glass shelves
When you remove the glass shelf, press the movable pin located
under the shelf with both hands and simultaneously push it inwards.
Then the shelf can be easily removed.
Shelf support
Glass
Bottle compartment
Disassembly: Hold both sides of the bottle rack with both hands. Push
it on the smooth side (without relief) and push it inward in the direction
of the arrow. When pushing hard, please note that the loop on the
edge of the bottle tray is separated from the groove of the holder. The
bottle shelf can then be removed.
Installation: Hold both sides of the bottle rack with both hands. First
install the loop on the raised side. Then gently push the other side
inward and the buckle can be attached.
INSTRUCTIONS FOR USING THE CHILD
SAFETY LOCK LEVER
Press the child lock lock lever with your thumb
in the direction shown below.
① and the water lever ② will be locked to
prevent children from taking water.
Press in the opposite direction to unlock and
take water
Shelf support
Glass
EN-28
Embossed side of the
bottle label holder