CONTINENTAL EDISON CERA612APPIX Guide D'utilisation page 72

BEFORE USE
• Remove all packaging, including the foam support at the bottom of
the refrigerator and the adhesive tapes that attach the accessories to
the box.
• Place the refrigerator in the correct position and adjust the feet to the
correct level.
• It is best to clean the refrigerator before using it.
• Remove the film: There is a layer of transparent film on the panels of
your product which can protect the products from scratches during
manufacturing and transport. You can choose to keep or remove the
film as needed.
• Place the fridge and adjust the level, clean it, let the fridge stand for 8
hours, then turn it on to check that the fridge works normally.
STARTING AND SETTING FUNCTIONS
Starting
Connect the power cord.
•
During the first start-up, the screen displays the temperature values
•
set by default (the temperature of the refrigeration compartment is
set to 5 ° C, the temperature of the freezing compartment to -18 ° C)
Setting the LED display functions
The default mode is power saving mode at startup: the screen turns
on for 20 seconds and then turns off.
This mode saves energy and extends the life of the LED indicators.
EN-24