Tools Required - R&G CP0228BL Instructions

TOOLS REQUIRED


Socket set to include 17mm and 19mm sockets and wrench.

Set of metric Allen keys 4 and 5mm A/F.

Torque wrench (up to 40Nm).

Drill.

28mm Hole saw.
Page | 4
LEGEND
ITEM 1 = B0431 with CS340 (12mm) (BOTH CRASH PROTECTORS) (x2).
ITEM 2 = BC0002 CRASH PROTECTOR CAPS (x2).
ITEM 3 = M12x1.25x100mm LONG HEX HEAD BOLT (x1).
ITEM 4 = M12 PLAIN WASHERS (x2).
ITEM 5 = LW0001 (M12 SHAKE PROOF WASHERS) (x2).
ITEM 6 = S0277 (LEFT HAND SIDE SPACER 18mm LONG) (x1).
ITEM 7 = T0012 MARKING TOOL (75MM LONG M12) (x1).
ITEM 8 = M12x1.25x110mm LONG HEX HEAD BOLT (x1).
ITEM 9 = S0242 (RIGHT HAND SIDE SPACER 15mm LONG) (x1).
PICTURE 1 PICTURE 2
PICTURE 3
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com