Music Streaming; Listening To Music From An Audio; Device; Operating An Audio Device With This - Sony MEX-BTS5700U Mode D'emploi

Music streaming

Listening to music from an audio

device

You can listen to music of an audio device on this
unit if the audio device supports A2DP
(Advanced Audio Distribution Profile) of
Bluetooth technology.
1
Connect this unit and the Bluetooth
audio device (page 25).
" " appears during connection.
2
Turn down the volume on this unit.
3
Press (SOURCE) repeatedly until
"Bluetooth Audio" appears.
4
Operate the audio device to start
playback.
5
Adjust the volume on this unit.
Adjusting the volume level
The volume level is adjustable for any difference
between the unit and the Bluetooth audio device.
1 Start playback of the Bluetooth audio device at
a moderate volume.
2 Set your usual listening volume on the unit.
3 Press the select button.
4 Rotate the control dial to select "Bluetooth
Audio Level," then press the select button.
5 Rotate the control dial to adjust the input level
("+18dB" – "0dB" – "–8dB").

Operating an audio device with this

unit

You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
To Press
(6) (PAUSE)*
Play
(6) (PAUSE)*
Pause
(SEEK) –/+ (./>) [once
Skip tracks
for each track]
and hold (SEEK) –/+ (./
Reverse/
>)
Fastforward
(1) (REP) on this unit*
Repeat play
(2) (SHUF) on this unit*
Shuffle play
(3)/(4) (ALBUM –/+)
Skip albums
*1 Depending on the device, it may be necessary to
*2 Press repeatedly until the desired setting appears.
Operations other than the above should be
performed on the audio device.
Notes
• Depending on the audio device, its information, such
• Even if the source is changed on this unit, playback
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.

Initializing Bluetooth Settings

You can initialize the all Bluetooth-related
settings from this unit.
1
2
3
Note
When disposing of this unit, phonebook data should
be deleted with "Initialize."
1 on this unit
1 on this unit
2
2
press twice.
as title, track number/time, playback status, etc.,
may not be displayed on this unit. The information is
displayed during Bluetooth Audio playback only.
of the audio device does not stop.

Other settings

Press (BT).
The Bluetooth settings menu appears.
Rotate the control dial to select
"Initialize," then press the select
button
The confirmation appears.
Select "Yes."
"Initializing..." appears while initializing the
Bluetooth settings.
29