Volume Control; Mute Button - Doro AlertEasy 314C Mode D'emploi

Making a call
Regular dialling
1. Pick up the handset.
2. Enter the desired number.
Dialling using correcting function
1. Enter the required number. Mistakes can be erased using C.
2. Pick up the handset OR press
If VOICE is activated the numbers 0-9 will be heard as the numbers are dialled.
Redialling
If the number dialled is engaged or if you wish to redial the last number
dialled, lift the handset (or press
Volume control
The handset volume may be adjusted during a call using
To adjust the speaker volume, use
Ring Signal
There is a ring signal strength switch on the side of the telephone:
Mute button
Press and hold
z
the microphone.
Speaker
1. Press
. The handsfree function (speaker) will be activated and the
s
LED indicator next to the button will illuminate.
2. Dial the telephone number. Adjust the speaker volume with the volume
control on the side.
3. Speak towards the microphone located on the front edge of the telephone.
4. Press to terminate the call.
s
If you wish, you can switch between handset mode and handsfree mode
during the call by pressing
Please note!
Please remember that in handsfree speaker mode, it is only possible for one person at a time
to talk. The switch-over between speaker and microphone is automatic and dependent on the
sound level of the incoming call and the microphone respectively. It is therefore essential that
there are no loud noises, e.g. music, in the immediate vicinity of the telephone, as this will
disrupt the handsfree function.
Q
s
Ring volume
to disable the handset microphone, release
.
s
English
OR press , and the number is dialled.
s
) and press the redial button
(on the side of the phone).

.
r
/ .
Q
to reconnect
z