Volume Control - Doro CONGRESS 100 Manuel D'utilisation

Masquer les pouces Voir aussi pour CONGRESS 100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Settings
Memory
This telephone has 10 indirect memories (0-9).
When a number is stored in a memory location, you need to press only two
buttons to make the call.
Storing numbers
1. Lift the receiver and press store button
2. Press memory button
m
.
3. Select memory location by pressing one of the number keys
4. Enter the phone number (max 21 digits).
5. Press store button
P
and replace the receiver. The number is now stored.
Calling using memory locations
1. Lift the receiver (or press the headset button) and wait for a dialling tone.
2. Press memory button
m
.
3. Select memory location by pressing any of the number keys
A pause may be inserted into the telephone number by pressing P .
Enter the name of the call receiver on the memory card, if desired. In case of a number change,
replace the old number with the new.
6
P
(ignore the dialling tone).
-
.
0
9
-
.
0
9
www.doro.com
Settings

Volume control

The volume level in the earpiece can be increased or decreased using the volume
buttons during a call (5 steps). Use the volume up button $ to increase the
volume and the volume down button £ to decrease the volume.
Ringer
1. Lift the receiver (ignore the dialling tone) and press the store button
and
.
#
2. Select ring signal by pressing the number keys
table below.
3. Press store button
and replace the receiver. The ring signal is now set.
P
Key/setting
Melody type
1.......................................... Melody A........................ Low
2.......................................... Melody A........................ Normal
3.......................................... Melody A........................ High
4.......................................... Melody B........................ Low
5.......................................... Melody B........................ Normal
6 (factory setting)................ Melody B........................ High
7.......................................... Melody C ....................... Low
8.......................................... Melody C ....................... Normal
9.......................................... Melody C ....................... High
0.......................................... Off * ............................... -
* If the key 0 is selected, the ring signal will be turned off until the next time the receiver is
lifted. After that, the ring signal will revert to the previous setting.
www.doro.com
English
P
-
in accordance with the
0
9
Ringer level
7

Publicité

Table des Matières
loading

Table des Matières