Doro PhoneEasy Display 312C Mode D'emploi page 9

All manuals and user guides at all-guides.com
Memory
The telephone also has 2 one-touch and 10 two-touch memories for
frequently dialled telephone numbers.
When a number is stored into memory you only press one or two buttons
dependent on location to make a call.
The one-touch memories are M1-M2, the two-touch memories are
accessed using the telephone keypad digits 0-9.
Storing One-touch Memories
1. Press
.
P
2. Enter the telephone number to be stored (up to 22 digits). Press
3. Enter the name (up to 16 characters). Press the corresponding
number button one or more times for the first letter (see the table for
the Phone Book). Press
4. Press either M1-M2 to store the number.
Dialling using One-touch Memories
1. Lift the handset (or press
2. Press either M1-M2, the stored telephone number will now be dialled.
Storing Two-touch Memories
1. Press
.
P
2. Enter the telephone number to be stored (up to 22 digits). Press
3. Enter the name(up to 16 characters). Press the corresponding number
button one or more times for the first letter (see the table for the
Phone Book). Press
4. Press either
Dialling using Two-touch Memories
1. Lift the handset (or press
2. Press
m
3. Select a memory location by pressing the relevant keypad digit
Press if you need to insert a pause in the telephone number.
r
If you wish to change a stored telephone number, store the new number in the same
location as the old one.
.
P
s
.
P
- to store the number.
0 9
s
.
English
) and wait for a dialling tone.
) and wait for a dialling tone.

.
P
.
P
- .
0 9