JUKI MF-7200D/UT42 Manuel D'utilisation page 54

2) After adjustng the stroke, loosen screw 5 from
the lower sde, and move collar 4 to the left and
rght to adjust so that the stroke becomes 18 mm,
same as that of the looper thread trmmng solenod.
18 mm
When the magnet works, confirm that rubber seat 7
comes n contact wth UT base at the same tme as
7
5
rubber cushon 6 comes n contact wth the magnet
man body.
4
6
– 13 –