Adjusting The Air Regulator - JUKI MF-7200D/UT42 Manuel D'utilisation

2. Piping drawing for air blow.
3
4
2. Adjusting the air regulator
2
Air hose
1
3
5
3
@3
1
2
@3
A
– 10 –
6
5
3
1) Insert the ar hose to ar regulator 1 .
2) Use the ar pressure at 0.4 to 0.5 MPa (4 to 5 kgf/cm
3) Draw up regulator knob 2 , turn knob 2 and adjust the
ponter to 0.4 to 0.5 MPa to adjust the ar pressure.
4) After the adjustment, press downward regulator knob 2 .
5) When dranage s collected at secton A of regulator
1 durng usng, press dran cock 3 to dscharge the
dranage.
UT45
).
2