During Work; The End Of Operation; Emptying The Hopper - Gaspardo ALITALIA Emploi Et Entretien

ENGLISH

4.13 DURING WORK

Maintain e seeding speed compatible with type and cultivation
of the soil in order to avoid breakages or damage.
- The form dimensions and material of the drive shaft elastic
pins have been chosen for safety. The use of pins not ori-
ginal or more resistant, could cause serious damage to the
seeding machine.
- Avoid curves with the machine on the ground, neither work
in reverse.
Always lift it when changing direction or reversing.
- Maintain e seeding speed compatible with type and cultiva-
tion of the soil in order to avoid breakages or damage.
- Never lower the seeder when the tractor is not in travel in
order to prevent the clogging or damage of the seed coulters,
for the same reason, we discourage going into reverse gear
when the seeder is on the ground.
- A high seed moisture content, especially if the seed is dres-
sed, can cause clogging in the distribution.
- Never leave the seeds in the hopper for a long time, and,
before starting work, make sure the hopper, distributors and
seed delivery tubes are not excessively damp.
- Make sure that no foreign material (rope, sack paper) enters
the storage tank when seed is being loaded.
CAUTION
CAUTION
USE AND MAINTENANCE
The seeder can transport treated chemical substances toge-
ther with the seed. Do not allow children, people, pets to come
near the seeding machine.
Keep away from the seed storage tank and refrain from at-
tempting to open it when the seeder is working or about to
begin working.

4.14 THE END OF OPERATION

EMPTYING THE HOPPER

PREPARING THE MACHINE FOR ROAD TRANSPORT
IMPORTANT!
Adhere to the regulations in force on road transport in the
user's country.
DANGER
ATTENTION
cod. G19503391