Loading Platform; Before Starting Work; Operation Start; Important - Gaspardo ALITALIA Emploi Et Entretien

4.9 HOPPER
the distribution parts are moving.
tective grilles.
Checking the product level inside the hopper
4.9.1 HOPPER AND TANK FILLING
- All fertilizer spreader tank loading and unloading operations
must be carried out with the planting unit at a standstill, on
the ground, with the frame open, with the hand brake on,
with the motor switched off and the starter key removed
from the control panel. Make sure that chemicals are kept
out of harm's way.
- All operations must be carried out by trained staff wearing
suitable protection (overalls, gloves, boots, masks etc) in a
clean, dust-free environment.
Overalls Gloves
- Load from the outer sides of the machine.
ensure that no foreign bodies (string, paper, etc.) enter them.
- The seeding machine can transport chemical substances.
Do not allow children, people, pets to come near the seeding
machine.
cod. G19503391
WARNING
Shoes Goggles
USE AND MAINTENANCE

4.10 LOADING PLATFORM

4.11 BEFORE STARTING WORK

Before starting up the machine check that there are no third
parties near it. Third parties are maintenance operators,
operators, etc..

4.12 OPERATION START

For a successful seeding work it is useful to seed on a small
stretch and check that the seeds are regularly distributed in
the ground.
F
Mask
WARNING!

IMPORTANT

L
S1
70 liters
S2
6 liters
ENGLISH
G
Level 1
Level 2