General Precautions
Carefully read the instructions before starting installation and performing any procedures as explained
•
by the manufacturer.
Installation, programming, commissioning and maintenance should only be done by qualified and
•
skilled staff that is trained to follow the laws in effect, including all pertinent safety regulations
Before doing any cleaning or maintenance jobs, cut off the main power supply.
•
The device must only be used for the purpose it is specifically intended and designed.
•
The manufacturer declines all liability for any damage as a result of improper, incorrect or
•
unreasonable use.
This product complies with the law.
Decommissioning and disposal. Dispose of the packaging and the device at the end of its life
cycle responsibly, in compliance with the laws in force in the country where the product is used. The
recyclable components are marked with a symbol and the material's ID marker.
THE DATA PRESENTED IN THIS MANUAL MAY BE CHANGED, AT ANY TIME, AND WITHOUT NOTICE.
MEASUREMENTS, UNLESS OTHERWISE STATED, ARE IN MILLIMETERS.
Functions of the keys
- Ringer volume setting (high-medium-low-Off). Red LED on = ringer is excluded.
- During a call it sets the speaker volume (high-medium-low).
Activate/Deactivate communication.
Blue LED on = communication is active.
Door opener (Blue LED).
You system can be set up so that the LED stays lit when the front door is open.
* Key 1 (blue LED)
* Key 2 (blue LED)
* Key 3 (blue LED)
* Key 4 (blue LED)
* The key functions can be programmed on a webpage. Follow the procedure described in
the 'Installation and Configuration' file.
To clean, only use soft, dry, or slightly-moistened rags. do not use any chemicals.