Idexx Quanti-Tray Sealer PLUS Mode D'emploi page 3

Quanti-Tray
User Manual
English
WARNING
RISK OF ELECTRIC SHOCK
Do not remove the outer shell of the sealer.
Do not spill water into the sealer.
When pouring water samples into the Quanti-Tray*, follow instructions in the Quanti-Tray insert.
RISK OF SKIN BURNS
Only trained personnel should clean the inside of the sealer. For cleaning instructions, refer to the "Cleaning
and Preventive Maintenance" section of this manual.
Overview
The IDEXX Quanti-Tray* Sealer PLUS is a motor-driven, heated-roller instrument designed to seal water samples inside IDEXX Quanti-
Trays. When used with Quanti-Trays and any IDEXX reagent (such as Colilert*, Colilert*-18, Colisure*, Enterolert*, Pseudalert*, or HPC for
Quanti-Tray*), the sealer automates the sample handling of bacterial enumeration.
Contents
Each IDEXX Quanti-Tray Sealer PLUS comes with the base sealer unit, regional power cord, input shelf, one Quanti-Tray* Rubber Insert
(blue), one Quanti-Tray/2000 Rubber Insert (black), MPN tables, and this user manual. Use only the blue or black rubber inserts with
the Quanti-Tray Sealer PLUS.
Note: Additional Quanti-Tray Rubber Inserts are available separately.
Technical Specifications of the Instrument
Weight 24 lb
Height 13 in.
Depth 14 in.
Width 16 in.
Operating
50–90°F
Temperature
Storage
–4 to 176°F
Temperature
Power 100–240 V
50/60 Hz
Sealer PLUS
*
11 kg
33 cm
35.5 cm
40.6 cm
10–32°C
–20 to 80°C
10 A
1