Memory Capacity; Setting The Date And Time - Topcom ALLURE 270 Manuel D'utilisateur

Topcom Allure 270

8.1.2 Memory capacity

The maximum capacity of the Allure 270 is 84 entries including names and numbers.
This number can be dedicated to the Phonebook and/or the Caller ID list. In this setting you
have to select the capacity of the Phonebook.
Use or to select the phonebook memory 'MAX DATABANK = XXX (default 032)'.
Press to confirm the phonebook memory.
The Caller ID list memory size will be displayed briefly and the unit will go to standby mode.
To have acces to the memory setting, you have to remove the batteries for more than 10
minutes.
All stored information will be erased after initialisation.
8.2 Settings
This Allure 270 has multi-function keys, which perfom different function
depending on the status of the telephone. Please follow the user-guide
carefully to avoid any perceived mal-function.
8.2.1 Setting the language of the display text.
When you did not change the language during initialisation, you can select it as follows:
• Press for 3 seconds.
• Use or to select the desired display language.
• Press to go to the next setting.
• If no button is pressed within 10 seconds, the unit will return to standby mode.
8.2.2 Setting the display contrast.
You can select the desired contrast as follows:
• Press button for 3 seconds, the display language is shown.
• Press button again.
• Use or button to select the desired display contrast.
• Press to go to the next setting.
If no button is pressed within 10 seconds, the unit will return to standby mode.

8.2.3 Setting the Date and Time

When you have a subscription to the Caller ID service and your telephone provider sends the
date and time together with the telephone number, the phone's clock will be set
automatically. The year must be set manually.
It is also possible to set the clock manually:
• Press for 3 seconds, the display language is shown.
• Press 2 times. The year will blink.
• Use or to select the year.
• Press to confirm the year and change to month.
• Repeat the previous steps for changing and confirming month, day, hour and minutes.
• After confirming the minutes, you will go to the next setting.
If no button is pressed within 10 seconds, the unit will return to standby mode.
8 Topcom Allure 270