Clipphone 40
3.5 Last number redial
• When you want to call back the last dialled telephone
n u m b e r, press the Redial button as soon as you have
picked up the re c e i v e r. The number will be redialled
a u t o m a t i c a l l y.
• Press the Call list button if you want to look at the 8 last
dialled telephone numbers.
• When you have selected a number, press the Line button
and it will be dialled automatically.
3.6 Memory numbers
You can program 11 telephone numbers (of max. 16 digits)
in the memory under the memory locations 0-9 and direct
memory button M1.
3.6.1 Programming a memory number
• Press the Set button.
• Enter the telephone number.
• Press the Set button again.
• P ress the desired memory location 0-9 (numerical buttons)
or M1 (direct memory). The number is pro g r a m m e d .
3.6.2 Calling a memor y number
• Press the Line button followed by the Memory button.
• Press the number of the memory location (0-9).
• The programmed telephone number will be dialled
automatically.
3.6.3 Calling direct memory number M1
• Press M1 followed by the Line button.
• The programmed telephone number will be dialled
automatically.
Note : You can also first look up the memory number before
pressing the Line button.
3.7 Setting the LCD contrast
• Press the Erase button 3 times until 'SET' is shown on
the display.
• Press the Down button.
• The selected LCD contrast is shown on the display.
• Select the desired contrast level by pressing the Up or
Down button.
• Confirm this setting by pressing the Erase button.
18