Topcom ALLURE 270 Manuel D'utilisateur page 15

13.1.2 OGM2
OGM2 is the message that the caller will hear that is calling from the telephone number which
is set in the menu 'OGM2 CID NO'.
When the Allure 270 receives the preprogrammed Caller ID number, this message will be
playbacked instead of OGM1. With this function you can record dedicated messages for one
person.
a. To record OGM2
• Press and hold
• After you hear a beep, release
• Press again to end recording.
• The device will playback the recorded message after a beep.
To check your OGM2 again, press
b. To set the OGM2 caller ID number
• Press for 3 seconds, the display language is shown.
• Press repeatedly
• Enter the telephone number by means of the numerical keypad.
• Press confirm.
13.2 Turning Answering Machine ON/OFF
• Press to switch the answering machine ON or OFF. The setting is displayed.
13.3 Day and Time stamp
Every time a message is recorded, the date and time will also be stored.
When playing back a message, the date and time of the recording will be announced before
the message. The language of the Voice Prompt is indicated on the giftbox. The display
language of the device functions is the same as the voice prompt.
13.4 Number of rings
To set the number of rings before the telephone answers a call:
• Press and hold the on/off button until 'AUTO RINGER X' is displayed.
• Press or to select the number of rings (1-6).
If you set the number of rings to 1, the talking caller ID will not work because the time for
pronouncing the number is too short.
13.5 Messages
After answering the call, the caller will hear your outgoing message (OGM).
He can record a message (max 30 seconds) after the beep. As soon as you have new
messages the number of new messages will be displayed.
The recording will be interrupted when it detect silence for 7 seconds or when you pick up a
the telephone.
Topcom Allure 270
.
and start saying you outgoing message.
briefly.
until 'OGM2 CID NO' is displayed.
Topcom Allure 270
15