Fantic FAT INTEGRA Livret D'utilisation Et D'entretien page 67

1. INTRODUCTION
Dear Customer,
thank you for purchasing our product.
Our electric bicycle is a combination of inno-
vation, design and comfort and has been de-
signed and manufactured exclusively in Italy.
The innovative concept of assisted pedalling
will revolutionize your cycling habits and open
up new horizons; assisted pedalling offers a
more comfortable ride without detracting any-
thing from the healthy pleasure of cycling.
Keep this booklet for future consultation, along
with the booklet stating the safety recommendations.
2. MEANING OF "EPAC" - Electrical Power Assisted Cycle
The acronym EPAC is derived from the initials
Electrically Power Assisted Cycle.
In order to be assigned the EPAC classifica-
tion, an electric bicycle must satisfy the re-
quirements set out in the European Standard
EN 15194-2008 and the Machine Directive
2006/42/EC.
In short, in order to be approved for EPAC clas-
sification, an electric bicycle must comply with
the following requirements:
- Auxiliary electric motor having a maxi-
mum continuous rated power of 0.25 kW.
- Propulsive power cut-off when the cyclist
stops pedalling.
- Gradual reduction of auxiliary power out-
put as the vehicle speed increases and
final cut-off when the speed reaches 25
km/h.
Ed. 1 - 03/2019
This bicycle has been manufactured using the
highest quality materials in conformity with all
the applicable standards and regulations.
Before using your new bicycle, we strongly rec-
ommend that you read and familiarize yourself
with the information and instructions con-
tained in this user and maintenance handbook
(hereafter referred to as the "Manual").
Provided the requirements set out in the
Directives are adhered to and maintained,
you may continue to use your bicycle in ac-
cordance with the regulations governing
the use of traditional (non electric) bicycles,
which means that may use it on cycle paths
and that you are NOT required wear a safety
helmet, take out Public Liability insurance
or fit the vehicle with a license plate.
Any attempt to modify the performance or
specifications of your EPAC bicycle may re-
sult in legal proceedings and fines.
In order to use your EPAC bicycle on the
public roads, you must first have it fitted
with all the accessories stipulated in the
Highway Code (front and rear lights, acous-
tic warning device, etc.) by a qualified in-
stallation technician.
In some countries it may be necessary to en-
sure that the bicycle specifications comply
with the locally applicable standards. Check all
such requirements before using your bicycle.
Introduction
00
EN_1