Entering A Locomotive From The Database - LGB marklin digital TRIX Mobile Station 2 Manuel D'instruction

Entering a Locomotive from the Database

Look for a free
memory space by
pressing this button
(several times if
necessary).
Select:
From database
8
or
or
SHIFT then additionally press then additionally press
Locomotive has been found, taken into
the locomotive list, and is ready to run.
The name is only find by mfx loco. The
other decoder only get the protocols and
the adress.
Locomotive has been found. The address
already exists and was not automatically
taken into the locomotive list. Take into
the list or reject as desired.
Locomotive was not found. Confirm and
search again. Check the locomotive if
necessary or program again, or if the
address is known, enter manually.