Entering a Locomotive with a Locomotive Card
Insert the locomotive card; the loco-
motive is immediately ready for use.
(In multiple device operation, this
is not possible at the MS2 slave
device.)
Note: If the internal memory placest
is full, a memory space must be de-
leted before a new locomotive can
be taken into the list (see page 19).
Finding a Locomotive
!The locomotive to be found must be the only locomotive standing on the track layout.
Locomotives with mfx decoders do not have to be standing on the track layout by them-
selves.
Look for a free memory space
by pressing this button (several times
if necessary).
SHIFT
then additionally press
then additionally press
If you see a menu item with a line
through it, this means it is not available
in this window.
The Mobile Station is looking for the
locomotive. A search is made in the
protocols mfx, DCC, and MM2 one after
the other.
Select:
Find
Select: Scroll
7