Arregui STYLO Manuel D'instructions page 6

<EN>
Thank you for purchasing this safe. We advise you to read the instruc-
tions before you install and use the safe to prevent its improper use from
making the guarantee void.
A. CHARACTERISTICS OF THE PRODUCT
FRONT DIAGRAM OF THE SAFE
1. KNOB.
2. PLASTIC COVER – EMERGENCY LOCK.
3. NUMERIC KEYPAD.
B. OPENING AND CLOSING THE SAFE
B.1. FIRST TIME THE SAFE IS OPENED AND INSTALLATION OF THE
BATTERIES
• Remove the small plastic cover on the front panel by pressing the left
side of the cover inward
• Insert the key into the key hole and turn it counter-clockwise direction
• Turn the doorknob clockwise direction to open the safe.
• In order to function, the safe needs 4 x 1.5 V alkaline batteries that are
placed at the back of the door.
• Open the cover of the battery holder and place the batteries taking into
consideration their polarity.
• On completion of this process the electronic system will be activated.
B.2. PROGRAMMING OPENING CODES
This safe has 2 opening codes: User code and master code.
The initial user opening code is 159 and the initial master opening code
is 654321. For your security, it´s important that you change them and
configure the codes you desire. To change it, proceed in the following
manner:
• Programming user code.
- Press the reset button (on the left-side of back of door) with a sharp
object.The yellow light will be on.
- Input any 3-8 digits you want, press "#" to confirm. A beep will indica-
te the personal code has been accepted and stored.
1
2
3