S&P CTB ECOWATT PLUS Manuel D'utilisation page 50

PARAMETERS
< Kp=100 OK
OK OK
PARAMETERS
< Ki=20 OK
OK OK
SENSOR IN1
<SIN SENSOR OK
OK OK
SP-2 FLOW
< 50% OK
OK OK
DIGITAL INPUT
< (NC) OK
OK OK
OUTPUT PULSES
< 4 OK
OK OK
PROGRAM C:1?
< NO YES
SI YES YES
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter.
This value corresponds to the % of pressure set point
being the fan in night mode. To connect a time clock or
potential-free switch to the digital input J11
DIGITAL INPUT
< (NO) OK
Digital input:
- NC: Normally closed contact. The fan will pass to night mode when contact is
Digital input:
opened.
- NC: Normally closed contact. The fan will pass to night mode when
- NO: Normally open contact. The fan will pass to night mode when contact is
closed.
Press or to manually modify parameter that
displays the speed by J8 output (TACOM). It is advised
not to modify.
Save parameters modified
50