Unit Confi Guration Via Console; Change Set Point; Change Operation Mode; Menu Config - S&P CTB ECOWATT PLUS Manuel D'utilisation

6.6. UNIT CONFIGURATION VIA CONSOLE

6.6.1. Change Set Point

Steps to follow to change the set point from main screen:
Si: Measured value (units depend on operation mode)
Sc: Set point
X% Fan speed in % (on maximum speed)
C: 1 Equipment number if connected to network

6.6.2. Change operation mode

Once the unit is powered, desired language selected and showing screen described above, continue with following sequence:
3"
+
ENTER PASSWORD:
1 1 1 OK
OK OK
CHANGE PASSWORD
SI NO
NO NO OK

MENU CONFIG

CHANNEL N: 1 OK
Press simultaneously for 3"
3
Enter the password
Default: 1 1 1
It is possible to assign a new password to your device
(channel)
Selection on which cannel you want to set the
configuration
43