Air Regulation - Fluval SEA PS1 Mode D'emploi

REGULATING FOAM COLLECTION
Collection Cup
Start up level
ATTENTION: It is advisable to adjust the Collection Cup in small intervals of 1/8" or 1/4" (2-4 mm) at a time. For every adjustment,
you will need a few hours before verifying if the foam production suits your needs. Repeat this process until you achieve the desired
setting without going beyond the indicated "Minimum" and "Maximum" water levels.

Air Regulation

important and depends on the aquarium stocking, the type of foaming desired, etc.
completely open to optimize ratio between air volume, the expansion nozzle and
quantity of water skimmed.
WARNING: Before removing the skimmer, empty the collection cup to prevent
the waste from accidentally falling in the aquarium.
ATTENTION: Always operate the Fluval Sea Protein Skimmer with the lid and the air intake tube correctly positioned. The air tube
should always be positioned correctly on the Collection Cup Lid and should never hang over the side of the aquarium to prevent the
drainage of the aquarium itself.
O-ring
Water
level
Heavy Stocking
and/or dark foam
NO!
O-ring
Min. water
level
OK
O-ring
Max. water
level
Normal Stocking
and/or clear foam