Safety Instructions - brennenstuhl Jet Light 38 W Mode D'emploi

Instructions manual

Safety instructions

Important!
Pay attention to the following instructions to avoid injuries or damages to property.
The worklamp is protected against splash water and moisture. Please note that the
worklamp is not waterproof.
Danger!
Failure to comply can endanger life through electrical current.
The guarantee does not cover damages caused due to non-observance of these
instructions especially the safety and the operations instructions. We are likewise not
liable for consequential losses.
The instructions manual must be kept and when necessary handed over to a third party.
• The worklamp must only be connected to an earthed 230 V~ shockproof socket
• Do not use the worklamp if you notice any malfunctions.
• Never open the worklamp except if you want to insert the lamp. Opening the lamp can
endanger your life through an electric shock.
• For safety reasons, it is forbidden to remodel, manipulate and or alter the worklamp
• Never look directly into the light.
• The worklamp does not have any parts that can be serviced by the user.
• Do not use the worklamp in explosive environments that have combustible liquids, gases
or dust.
• Keep children away from the worklamp.
• Inspect the worklamp regularly for damages.
• Disconnect the worklamp from the power supply voltage when changing the light.
Pull the plug out of the socket.
• Repairs can only be done by authorized specialists.
• Before you touch the worklamp, make sure it has cooled e.g. if you want to change the
light.
• All flammable materials must be kept at least 50cm away from the worklamp.
• A damaged input cable cannot be replaced. The worklamp must be correctly disposed of.
• Switch on the multiple sockets successively.
• Pay attention to the safety status of the worklamp.
12
All manuals and user guides at all-guides.com
Jet Light 38 W/55 W IP 54