brennenstuhl Jet Light 38 W Mode D'emploi page 16

Instructions manual
4 OPERATION AND FUNCTIONALITY
4.1 Connect the lamp to a 230 V~ power source.
Both sockets at the back of the lamp are current-carrying. Other electrical appliances
can be connected to these sockets. The maximum total capacity is 16 Amps.
You can turn the light on and off at the switch.
4.2 Wrap the cable around the housing after use (see Fig 12).
Attention!
After using the worklamp for a long time, the housing may heat up.
Do not touch the housing. Risk of injury!
5 BULB AND STARTER REPLACEMENT
Attention danger!
Unplug the light before you open it.
5.1 Changing lights and installation.
5.1.1 Open the transparent cover with a screwdriver. (Fig. 13).
PCE
1050
IP54
16
All manuals and user guides at all-guides.com
Fig. 12
Fig. 13
Jet Light 38 W/55 W IP 54