Operating Instructions; Safety Instructions; Technical Data - brennenstuhl AL 1050 Mode D'emploi

Operating Instructions

LED Spotlight
AL 1050 / AL 2050 / AL 3050
AL 1050 P / AL 2050 P / AL 3050 P
Attention: Before using the product, please carefully read the operating instructions and store
them in a proper location!

SAFETY INSTRUCTIONS

1. Always check the product for damage before use. Never use the product in case of any
damage. If this is the case, please refer to an electrician or the manufacturer's service address.
Non-compliance poses a risk of fatal injury from electrical current!
2. Do not use the product in potentially explosive atmospheres – danger of death!
3. Keep the floodlight away from children. Children are not aware of the risks imposed by
electric current.
4. Please never look directly into the light.
5. A destroyed protective cover cannot be replaced. The floodlight has to be disposed of.
6. The external flexible cable of this lamp cannot be exchanged; if the cable is damaged,
the lamp has to be scrapped.
7. The spotlight must be installed and serviced by a qualified technician.
8. Electrical installations may be performed only in compliance with safety regulations
(VDE 0100 for Germany).
9. A VDE-certified connection line must be used for the connection.
10. The spotlight must be properly grounded (with protection class I).
11. If the connection box is damaged, it has to be replaced by a qualified expert.
12. Always switch off the power supply before installation (Fig. 1). Caution: electric shock.
13. Observe the recommended mounting heights (see under Mounting).
Hot surface
Not suitable for applications with external dimmers.

TECHNICAL DATA

Protection class:
Protection type (versions without motion detector):
Protection type (versions with motion detector):
Temperature range:
20P123 Mobiler LED Strahler AL 0533153 210908.indd 7 20P123 Mobiler LED Strahler AL 0533153 210908.indd 7
I
IP 44
IP 44
-10 °C to +40 °C
7
08.09.2021 17:14:23 08.09.2021 17:14:23