Sun Oracle SPARC T4 Serie Guide D'administration page 89

load [-script] -source tftp://xxx.xxx.xx.xxx/chemin d'accès
où :
-script : ne demande aucune confirmation et agit comme si yes était
■
spécifié.
-source : indique l'adresse IP et le chemin d'accès complet (URL) de
■
l'image flash.
-> load -source tftp://129.99.99.99/pathname
NOTE: A firmware upgrade will cause the server and ILOM to be reset.
It is recommended that a clean shutdown of the server be done prior
to the upgrade procedure.
An upgrade takes about 6 minutes to complete. ILOM will enter a
special mode to load new firmware.
No other tasks can be performed in ILOM until the firmware upgrade
is complete and ILOM is reset.
Are you sure you want to load the specified file (y/n)?y
Do you want to preserve the configuration (y/n)? y
.................................................................
Firmware update is complete.
ILOM will now be restarted with the new firmware.
Update Complete. Reset device to use new image.
->
Une fois l'image flash mise à jour, le serveur est réinitialisé automatiquement, puis
il exécute les diagnostics et revient à l'invite de connexion sur la console série.
U-Boot 1.x.x
Custom AST2100 U-Boot 3.0 (Aug 21 2010 - 10:46:54) r58174
***
Net: faradaynic#0, faradaynic#1
Enter Diagnostics Mode
['q'uick/'n'ormal(default)/e'x'tended(manufacturing mode)] .....
0
Diagnostics Mode - NORMAL
<DIAGS> Memory Data Bus Test ... PASSED
<DIAGS> Memory Address Bus Test ... PASSED
I2C Probe Test - SP
Bus Device
=== ============================
6
6
<DIAGS> PHY #0 R/W Test ... PASSED
<DIAGS> PHY #0 Link Status ... PASSED
<DIAGS> ETHERNET PHY #0, Internal Loopback Test ... PASSED
## Booting image at 110a2000 ... ***
SP FRUID (U1101)
DS1338(RTC) (U1102)
Address Result
======= ======
0xA0 PASSED
0xD0 PASSED
Mise à jour du microprogramme
79