Password set up
How to enable or disable the password function ?
The password function is enabled when the password strap on the
controller module is installed.
To get acces to the controller module, handle as follows :
- Power down the projector and disconnect the power cord from the
wall outlet.
- Turn both lock screws of the top cover with a screwdriver or coin
counter clockwise.
- Lift up and pivot the top cover a little and pull it to the back to remove.
3-2
Password set up
How to enable or disable the password function ?
The password function is enabled when the password strap on the
controller module is installed.
To get acces to the controller module, handle as follows :
- Power down the projector and disconnect the power cord from the
wall outlet.
- Turn both lock screws of the top cover with a screwdriver or coin
counter clockwise.
- Lift up and pivot the top cover a little and pull it to the back to remove.
All manuals and user guides at all-guides.com
5975846 BARCODATA 2100 270396