Table des Matières
Publicité
Power Connection
The switched mode power supplied is located on right side of the
projector.
- Remove the black protection plate by turning out the 5 screws
(indicated with a white arrow) and loosening the both screws
(indicated with a hand). Slide the plate a little to the left and take the
plate off.
- Pull the power module a little to the front until the power selector plug
is reachable.
2 - 4
Power Connection
The switched mode power supplied is located on right side of the
projector.
- Remove the black protection plate by turning out the 5 screws
(indicated with a white arrow) and loosening the both screws
(indicated with a hand). Slide the plate a little to the left and take the
plate off.
All manuals and user guides at all-guides.com
5975846 BARCODATA 2100 100696
Publicité
Table des Matières
