Fein KBM 32 Q Notice D'utilisation page 15

3 41 01 011 06 3.book Seite 14 Mittwoch, 20. Juni 2007 7:58 07
EN
Intended use of the power tool.
Instructions for putting into
operation.
Mounting the guard protecting against
chippings and accidental contact (Figure 7).
Mounting the coolant container.
Operating instructions.
Adjustments.
Set the stroke range (Figure 1).
Changing the tool.
Core bit (Figure 10).
Twist drill and core drill bits with M 18x6/P 1.5
(Figure 11).
General operating instructions.
Putting into operation.