Publicité
Les langues disponibles
Les langues disponibles
3 41 01 011 06 3.book Seite 13 Mittwoch, 20. Juni 2007 7:58 07
Avoid touching the drilled core that is automati-
cally ejected by the centering pin when the work-
ing procedure is finished.
Operate the power tool only from earthing contact
sockets that comply with the specifications. Do
not use any connection cables that are damaged;
use extension cables with an earthing contact that
are checked at regular intervals.
Do not rivet or screw any name-plates or signs
onto the power tool.
Wear personal protective equipment. Depending
on the application, use a face shield, safety gog-
gles or safety glasses. Wear ear protection.
Do not use accessories which are not specifically
designed and recommended by the power tool
manufacturer.
Clean the ventilation openings on the power tool at
regular intervals using non-metal tools.
The guard protecting against chippings and acci-
dental contact must always be mounted during
operation.
The motor must not be able to descend on its own
accord while the tool is inserted.
At a glance.
1 Lever for setting the stroke range
2 Motor switch
3 Capstan handle
4 Depth scale
5 Main switch
6 Magnetic foot
7 Guard protecting against chippings and acci-
dental contact
8 Slit for the clamping strap
9 Coolant connection
10 Tool holder (Quick IN)
11 Adapter for geared drill chuck with core drill
thread (M 18x6/P 1.5)
12 Standard accessories
EN
Publicité
