Explanation Of Symbols; Operations - Baxtran PD6 Manuel D'utilisation

LED display:
LCD display:
Zero indicator
Tare indicator
Stable indicator
Low battery indicator. Indicate that the batteries should be replaced
Kg kg units. When "kg" is displayed, it means the weight shown is in kg.
g kg units. When "g" is displayed, it means the weight shown is in g.
Ib Pound units. When "lb" is displayed, it means the weight shown is in lb.
oz Ounce units. When "oz" is displayed, it means the weight shown is in oz.
Hi High Preset Weight Limit.
Ok Between Low & High Preset Weight Limit.
Lo Low Preset Weight Limit.
TURN ON THE SCALE
Press
and then it will be ready for use.
UNITS SELECTION
Press
kg, g, lb, oz.
TARE FUNCTION
1. Put a container on the pan and press
memory and display will be brought to zero. Indication "
net weight. To cancel the tare mode, press
2. Tare range: Up to scale's maximum capacity.
ZERO FUNCTION
Press
moment, the
14
key to turn on the scale. The scale will go through a quick warm up procedure and test,
key to choose the needed unit, and the unit indicator will be shown. There are four units:
key to re-zero the display if the reading is not zero with no load on the platter. At this
will appear.
key when the display reading is stable. The tare weight will be stored into
" in the display will appear. The weight will be displayed as
key when no load on the weighing pan.
USER'S MANUAL PD

3. EXPLANATION OF SYMBOLS

4. OPERATIONS

EN