Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
Only for HG02837 (star):
Bend the two wire elements carefully out from
one another then insert the fixture
Alternatively, you may hang up the 3D rope
light figure
with the provided hook
1
For all models:
Place the 3D rope light figure
substrate.
For outdoor installation, if possible fix the 3D
rope light figure
1
spikes
and the cable ties
3
Check the stability of the 3D rope light figure
For indoor installation, place the 3D rope light
figure
on an even surface and fix it with the
1
cable ties
if possible. Otherwise, the product
7
may not stand stable.
Use
Plug the mains plug
product is switched on.
To turn the lighting off, remove the mains plug
from the socket.
Timer function
To switch on the timer function, press the timer
button
after the product is connected to the
6
socket of power supply. The timer button
light up when the timer function is activated.
The product lights glow permanently for 6 hours
and will be followed by a subsequent pause of
18 hours. Afterwards, the product will light up
again at its designated turn on time for 6 hours
followed by a subsequent pause of 18 hours.
To switch off the timer function, press the timer
button
again and the light of the timer but-
6
ton
will be turned off.
6
(see fig).
4
.
5
on a stable
1
in place with the ground
.
7
into the socket. The
2
will
6
Cleaning and care
CAUTION! RISK OF ELECTRIC SHOCK!
First remove the mains plug
CAUTION! RISK OF ELECTRIC SHOCK!
For reasons of electrical safety the product must
never be cleaned with water or other liquids or
immersed in water.
Let the product cool before you clean it. Risk
of injury!
Do not use any solvents, petrol or similar items.
This would damage the product.
Only a dry, lint-free cloth should be used for
.
cleaning.
1
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities. The Green
Dot is not valid for Germany.
Observe the marking of the packaging
materials for waste separation, which
2
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal author-
ity for more details of how to dispose of
your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
from the socket.
2
GB/IE/NI
9
Publicité
Chapitres
Table des Matières
