Cooling Of Hydraulic Oil; Maintenance Of The Oil Radiator - RCM MILLE SK Manuel D'utilisation Et D'entretien

HYDRAULIC SYSTEM "2/2" (FIG.14)

Cooling of hydraulic oil

There is a radiator 1 in the hydraulic system. It cools the oil in the circuit. An electric fan 2 cools the oil in the radiator.
When the temperature of the oil in the tank 10 (Fig.13) goes above 60° C, the bulb 3 signals this to the electric fan 2
which automatically starts up and cools the oil. The fan goes off when the oil temperature falls to 50°C.

Maintenance of the oil radiator

Check that the blades on the radiant surface of the radiator are always clean. If this is not the case, clean them with an
air jet.
N.B.: Clean the fi ns of the radiator body with a brush and diesel fuel at least once a week.
3
1
2
51