Refuse Container; Safety Brackets For Refuse Bin In Raised Position - RCM MILLE SK Manuel D'utilisation Et D'entretien

The refuse container collects all the waste picked up by the brushes. When the refuse container is full, proceed as
follows to empty it:
• Move lever 1 to position A to raise the refuse container.
• Manoeuvre the motor-sweeper so that the refuse container is positioned over a refuse collection container.
• Move lever 2 to position A to open the refuse container.
!
Danger!
Only empty the refuse container, in raised position, with the motor-sweeper on fl at ground. Otherwise the
machine could tip backwards.
Make sure that nobody is standing near the motor-sweeper before you raise or empty the refuse container.
B B
A A B B
A A A A

Safety brackets for refuse bin in raised position

When the refuse bin is raised to allow work to be carried
out, the safety brackets 3 MUST be inserted in the right
and left-hand lift cylinders 4.
N.B.: remove the brackets 3 when the work is com-
plete.
REFUSE CONTAINER (FIG.15)
1
2
52
3
4
4