Fault Correction - Grizzly BRM 4013 Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
All manuals and user guides at all-guides.com
Troubleshooting
Problem
Possible Cause
Too little petrol in the tank
Incorrect starting sequence
Spark plug connector (
Engine does not
not put on correctly
start
Sooted spark plug
Incorrectly adjusted carburet-
tor mix
Engine starts but
Dirty air filter (
equipment does
not run at full
Incorrectly adjusted carburet-
power
tor mix
Incorrectly adjusted carburet-
tor mix
Engine splutters,
stops
Sooted spark plug (
Ventilation holes blocked
Engine over-
Incorrect spark plug (
heats
Too little engine oil in the
engine
Dirty air filter (
Engine smokes
Too little engine oil in the
engine
Grass too short or too long
Output unsatis-
Blade blunt
factory or engine
labouring
Blade blocked with grass,
grass collection box full, ejec-
tion channel blocked
Blade blocked with grass
Blade does not
turn
Blade not installed correctly
Abnormal nois-
Blade not installed correctly
es, rattling or
Blade damaged
vibrations

Fault Correction

Fill with petrol
Follow the instructions for starting the
engine (see "operation")
Attach the spark plug connector
14)
Clean, adjust or replace the spark
plug (see "cleaning and mainte-
nance")
Have the carburettor adjusted by a
specialist workshop
Replace the air filter (see "cleaning
10)
and maintenance")
Have the carburettor adjusted by a
specialist workshop
Have the carburettor adjusted by a
specialist workshop
Clean, adjust or replace the spark
plugs (see "cleaning and mainte-
15)
nance")
Clean the ventilation slot
15)) Change the spark plug
Fill with engine oil (see "initial opera-
tion")
Replace the air filter (see "Cleaning
10)
and Maintenance")
Fill with engine oil (see "initial opera-
tion")
Change the cutting height (see "set-
ting the cutting height")
Have the blade sharpened or replaced
by a specialist workshop
Remove the grass (see "cleaning and
maintenance")
Remove the grass
Have the blade installed by a special-
ist workshop
Have the blade installed by a special-
ist workshop
GB
89

Publicité

Table des Matières
loading

Table des Matières