Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
S e t t i n g s
Default profile—Select the profile you wish to be automatically activated when a
car kit is connected.
Automatic answer—Calls are answered automatically after one ring when a car
kit is connected. Select On or Off.
Lights—Select to keep the phone lights always on, or to shut off automatically
after several seconds. Select On or Automatic.
Loopset
A LPS-4 Loopset accessory allows your device to optimize sound quality when
coupled with a hearing aid that is set to T-coil mode.
In the standby mode, select Menu > Settings > Other settings > Enhancements >
Loopset > Use Loopset > Yes or No.
If the Loopset is connected and recognized through the Pop-Port™ connector, the
phone automatically uses the Loopset.
TTY/TDD
Check with the manufacturer of the TTY/TDD device for a connecting cable
that is compatible with your phone. TTY/TDD communications depend on
network availability. Check with your service provider for availability and
description of services.
In the standby mode, select Menu > Settings > Other settings > Enhancements >
TTY/TDD > Use TTY > Yes or No.
Charger
In the standby mode, select Menu > Settings > Other settings > Enhancements >
Charger and one of the following:
Default profile—Select the profile you want to automatically activate when your
phone is connected to the charger.
Hearing aid
To optimize sound quality, you can set your phone to couple to a T-coil-equipped
hearing aid.
In the standby mode, select Menu > Settings > Other settings > Enhancements >
Hearing aid > T-coil hearing aid mode. Select On to activate the HAC. Verify that
the hearing aid is set to T-coil mode, and hold the phone against the ear.
Only activate the T-coil hearing aid mode when using your device with a hearing
aid or it may impact the audio performance of the device.
57
Publicité
Table des Matières
