Broiler Flame - Amana ARG7303 Serie Manuel Du Propriétaire

Adjust Oven Burner Flame
1. Remove storage drawer.
• See Removing Storage Drawer section.
2. Locate and remove 2 screws attaching Z-shaped
cover plate.
• Cover plate located in center, rear of storage drawer
cavity.
• Removing cover plate exposes oven burner orifice
and air shutter.
3. Loosen air shutter lock screw and open or close air
shutter.
• If burner flame is blowing or noisy, reduce airflow to
burner.
• If burner flame is yellow and does not hold its
shape, increase airflow to burner.
• Tighten air shutter lock screw after adjusting.
4. Replace cover plate and storage drawer.
C
A
B
A—Air Shutter Screw
B—Orifice Hood
C—Air Shutter
Adjusting Oven Burner Flame

Broiler Flame

Radiant Screen Style
Broiler flame should appear hazy or fuzzy. Haze should
be no more than 3 / inch thick. The radiant screen should
8
begin to glow red or orange within 1–2 minutes.
Because broiler has a fixed orifice it can not be adjusted.
Broiler does not have an air shutter.
All manuals and user guides at all-guides.com
15