Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Oven Rack Placement
Position oven rack before turning oven on.
!
WARNING
To avoid damaging oven liner or creating fire, do not
line oven bottom or oven racks with foil.
1. Pull rack forward to stop position.
2. Raise front edge of rack and pull until rack is out of
oven.
3. Place rack in new rack position.
• Curved edge of rack must be toward rear of oven.
Oven Rack Placement
• Keep pans and baking sheets 2 inches from oven
walls.
• Stagger pans placed on different racks so one is not
directly over the other.
Pan Placement
All manuals and user guides at all-guides.com

Baking

1. Open oven door to confirm nothing is stored in oven
2. To preheat oven, turn oven temperature knob to
3. Place food in oven.
4. After cooking time elapses, remove food and turn
Check for Bake Burner Flame
Allow no more than 40–60 seconds before burner ignites
and heat is felt. To check for heat, open oven door to first
stop and place hand over oven door. If heat is not felt, turn
temperature knob to OFF position. If burner repeatedly
fails to ignite, contact an authorized servicer.
20
cavity and set racks to proper height.
desired temperature.
• Set oven temperature from 170°F to 550°F.
• Oven indicator light glows if knob is set to any
position but OFF .
• When oven reaches desired temperature, PRE-
HEATED light glows and oven beeps 6 times.
• If self-clean lever is moved to lock position while
baking, LOCKED light flashes and oven does not
heat. Move lever to unlocked position to resume
baking.
oven temperature knob to OFF .
OVEN
BROIL
CLEAN
LOCKED
PREHEATED
550
500
Temperature Knob
OFF
WM
200
250
300
350
400
450

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Arg7302 serieArg7202 serieArg7102 serie

Table des Matières