Operating Surface Burners; Operating Surface Burner During A Power Failure; Cooking Utensils - Amana ARG7303 Serie Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Surface Burners

!
WARNING
To avoid risk of serious personal injury, property
damage, or fire, do not leave burners unattended while
in operation. Grease and spillovers can ignite causing
a fire.
1. Push burner knob in and turn control knob
counterclockwise to LITE position.
• Burner should ignite within 4 seconds. If burner
does not ignite within 4 seconds turn control knob
to OFF position and follow directions in "Placing
Grates and Burner Caps" and "Before Calling for
Service" section. Try burner again. If burner still
does not ignite in 4 seconds, contact an authorized
servicer.
OFF
Possible Burner Knobs
2. After gas ignites, turn control to desired setting.
• Each control knob can be set to any required
cooking temperature. Burner settings do not have
distinct clicks.
• Use HI to bring food to boiling temperatures. When
food is boiling temperature setting should be
reduced.
• After lighting burner do not operate burner for long
periods of time without cookware on the grate. The
finish on the grate can chip without cookware to
absorb heat.
3. Turn control knob to OFF position when finished
cooking.
All manuals and user guides at all-guides.com
Adjusting Burner Flame Size
• While turning the burner control knob, watch the burner
• Flame size should match the size of the pan. Do not
Operating Surface Burner during a Power
OFF
Failure
Although the system that lights the burners is electric,
surface burners can be ignited during a power failure.
Never attempt to light bake or broil burners during power
failure.
1. Hold match at base of desired burner.
2. Push in burner control knob and turn to LITE position.
3. After gas ignites, remove match from burner and turn

Cooking Utensils

• Use proper pan size. Do not use a pan that has a
Does not cover burner
18
flame.
allow the flame to extend up the sides of the pan.
Flames that extend up the sides of the pan can ignite
clothing, make handle hot, or burn.
Adjusting Burner Flame Size
burner control knob to desired setting.
smaller bottom than surface burner. Do not use utensils
that overhang grate by more than 1 inch.
Use Proper Pan Size
More than 1 inch
overhang

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Arg7302 serieArg7202 serieArg7102 serie

Table des Matières