Virutex EB140PLC Manuel D'instructions page 49

A
(Figure 6.13)
A
A
(Figure 6.13.1)
6.5 Feeder belt replacement
Eliminate the pressure from the installation by
disconnecting the safety valve and locking it
with a padlock. Then set the main switch to 0
(zero), locking it with a padlock.
• Remove the screws and washers A (Fig. 6.13.1 and Fig.
6.13.2).
• Remove the cover B (Fig. 6.13) and open the feeder.
(Figure 6.13.2)
EB140PLC Premilling / Annex operating instructions - 49
A
A