Virutex EB140PLC Manuel D'instructions page 28

(Figura B)
(Figura C)
28 - EB140PLC Premilling / Annex operating instructions
Minimum board thickness: 13 mm
Maximum board thickness: 45 mm
Edge thickness for boards between 30 and 45 mm (0.4 to 1
mm)
Edge thickness for boards between 13 and 30 mm (0.4 to 2
mm)
It is possible to make edgebanding with a 2 mm edge for
boards between 30 to 45 mm making a maximum rectifica-
tion of 1 mm. However, the user must take into account the
final measurements of the work due to the difference bet-
ween the rectification and the applied edge.
Max reel diameter: 590 mm
Feeder speed:
50 Hz: 5 m/min
60 Hz: 6 m/min
Trimmer speed: 10000/min
Equipment bits: D. 60 mm Z4-R2-10°
Optional bits: D. 60 mm Z4-R3-10° (Fig. 5)
D.60 mm Z4-45°
Dust collector connection: Virutex AS382L dust collector
Industrial dust collection connection: D.100
Glue tank capacity: ~ 1 kg
Working temperature: 160-210°C
Weight: 280 kg
Pneumatic working pressure: 6 bar
Air consumption at 6 bar: 5 litres/min, approx
Use "filtered," "dehumidified" and "non-lu-
bricated" air.
Air lubrication is harmful to the pneumatic
installation.
Total three-phase installed 50/60 Hz power:
kW
2.31/2.45
Gluing unit power: 1.2 kW
Three-phase feeder motor
50/60 Hz power: 0.18 KW
Three-phase trimmer motor
50/60 Hz power: 0.37 kW
Three-phase gluing unit motor 50/60 Hz power: 0.09 kW
Single-phase pre-milling unit motor power: 0.37 kW
Total single-phase installed 50 Hz power: 2.31 kW
Gluing unit power: 1.2 kW
Single-phase feeder motor power
50 Hz: 0.18 kW
Single-phase trimmer motor power
50 Hz: 0.37 kW
Power of the motor for the single-phase gluing unit
50 Hz: 0.09 kW
Single-phase spre-milling unit power: 0.37
-1
kW