Put Into Operation; Pump Operation - Wilo -Stratos MAXO Notice De Montage Et De Mise En Service

en
6.8 Collective run signal (SBM) – orange terminal block
➜ Fig. 23
An integrated collective run signal is applied at the SBM terminals as
a potential-free normally open contact. Contact load:
▪ Permitted minimum: SELV 12 V AC / DC, 10 mA
▪ Permitted maximum: 250 V AC, 1 A, AC1 / 30 V DC, 1 A
6.9 Connecting and removing the Wilo-Connector
WARNING
Risk of fatal electrical shock!
▪ Never connect or remove live plugs!
Connect
➜ Fig. 15 to 20
Spring clips: WAGO "Cage Clamp".
Remove
➜ Fig. 21
▪ Remove the Wilo-Connector only using a suitable tool!
6.10 Bluetooth radio interface
The pump has a Bluetooth interface for connecting to mobile
devices. Using the Wilo-Smart Connect app and a smartphone, you
can operate and adjust the pump and read out pump data.
Bluetooth is active by factory default and can, if required, be deac-
tivated via the Settings/Device settings/Bluetooth menu.
▪ Frequency band: 2400 MHz – 2483.5 MHz
▪ Maximum radiated transmission power: < 10 dBm (EIRP)
42
All manuals and user guides at all-guides.com
7
7.1
1. Fill and vent the system correctly.
To vent the rotor chamber if required, activate the pump venting
function in the pump menu.
7.2
Description of operating elements
➜ Fig. 3 and 4
Pos. Name
3.1
3.2
3.3

Put into operation

Venting

Pump operation

Explanation
Graphic dis- Provides information about settings and
play pump status.
Self-explanatory user interface for setting
the pump.
Green LED in- LED lights up, pump supplied with power.
dicator
There are no warnings and no faults.
Blue LED in- Pump is influenced externally via an inter-
dicator face, e.g. by:
• Bluetooth remote control
• Setpoint specification via analogue input
AI1 or AI2
• Intervention of building automation via
control input DI1 / DI2 or bus communica-
tion
• Flashes with active twin-head pump con-
nection
WILO SE 2019-11