Set Up And Preparation For Operation - Power Fist 8197824 Guide De L'utilisateur

SET UP AND PREPARATION FOR OPERATION

1. Bolt the Supprt Leg to the Log Splitter, lift the log splitter by the handles at both ends and place it
on a 60 - 75cm high, stable, flat and level work surface.
2. Familiarize yourself with the controls and features of this log splitter in the illustrations.
1. Log pusher
2. Work table
3. Splitting wedge
4. Lift handle
5. Support leg
6. Log retaining plates
7. Switch
8. Motor
9. Pushbutton box
10. Wheels for minor moving ONLY
11. Hydraulic control lever
12. Control lever guard
13. Bleed screw
14. Oil drain bolt with dipstick
TO ATTACH THE STAND
1
Ensure logsplitter is unplugged.
7